Drying equipment complete screw systems is divided into a feeding part and a mixing part. The feeding part is provided with a feeding spiral blade fixed on the screw line, and the mixing part is fixed with a mixing blade; The feeding spiral blade is a ribbon spiral blade, and is fixed connected with the rotating shaft through a rigid hanging ear; The stirring blade is a spiral blade fixed on the stirring part of the rotating shaft according to the helix; The outer edge of the stirring blade is equidistant with stirring teeth. The feed and mixing are integrated on a spiral shaft, which provides the basis for simultaneous granulation and mixing, and the mixing effect is very good.

The material characteristics and parameter characteristics of the spiral shaft for drying are reflected:

1, according to the use of different materials can be arbitrarily selected, stainless steel materials such as: SUS316L, SUS317L, SUS310S, etc.;

2, the whole axis machining accuracy is high, to ensure the whole axis concentricity;

3, the blade is more shaped, part of the blade outside the blade and the middle of the blade need to open holes and through the heating tube;

4, the central shaft needs to pass the heating medium, part of the spiral blade needs to be hollow also need to pass the heating medium;

5, most of the shafts need to be fitted with mixing parts suitable for the material.

Note: All products can be customized with materials, specifications, and models by customers!

Project specific products are measured and evaluated by engineers on-site, providing exclusive overall project solutions for you. Long term supply contracts can be signed to improve service guarantees.